LCSF Low Clearance Split Frame Tooling

Genuine Wachs Tooling for the LCSF Low Clearance Split Frame is compatible with all models from 6in through 48in (DN 150-1200). Genuine Wachs cut and bevel form tools can machine all common pipe materials and most pipe schedules. Single point tooling is used on heavy wall pipe and covers most pipe material and all pipe schedules. Premium Wachs Tooling for high alloy materials is available on select part numbers (denoted by a “P” suffix), with additional numbers available by special order.

Genuine Wachs Tooling is manufactured from premium tool steels utilizing exclusive designs to give you consistent quality cutting, and tested to the highest standards in the industry. The numbers shown are commonly used tooling for most applications. If you have an application for tooling not listed, please contact the factory to speak with a technical sales representative.

Beveling and Counterbore Tools
Description	Part Number	Application	Image
HSS Inside Bevel Tool		Short bevel tool for most materials. 30º - 1in (25mm) and 37.5º - 3/4in (19mm) maximum wall
30º x 3 1/8in (79mm)	43-702-05
37.5º x 3 1/8in (79mm)	43-703-05
HSS Inside Bevel Tool		Long bevel tool for most materials. 30º - 1in (25mm) and 37.5º - 3/4in (19mm) maximum wall
30º x 5in (127mm)	53-703-01 53-703-01P
37.5º x 5in (127mm)	53-703-00 53-703-00P
HSS Outside Bevel Tool		Outside bevel tool for most materials. 30º - 1in (25mm) and 37.5º - 3/4in (19mm) maximum wall
30º x 3 1/8in (79mm)	43-707-05
30º x 5in (127mm)	43-707-06
37.5º x 3 1/8in (79mm)	43-708-05
37.5º x 5in (127mm)	43-708-06
HSS Double Bevel Tool		Double bevel tool for most materials. 3/4in (19mm) maximum wall
30º x 3 1/8in (79mm)	43-709-05
30º x 5in (127mm)	43-709-06
37.5º x 3 1/8in (79mm)	43-710-05
37.5º x 5in (127mm)	43-710-06
HSS Compound Bevel Tool		Compound bevel tool for most materials. 1 1/4in (32mm) maximum wall for both tools
10º x 37.5º x 4in (102mm) Inside	43-712-01
10º x 37.5º x 4in (102mm) Outside	43-712-02
10º x 37.5º x 5in (127mm) Inside	53-705-00
10º x 30º x 5in (127mm) Inside	53-704-00
4:1 Taper, Counterbore HSS Tool	60-700-04	4:1 Taper, counterbore most materials Requires 60-405-UC Universal Counterbore Slide or 60-428-XX Bridge Slide

Consult with the factory for other bevel tool applications.

Parting Tools
Description	Part Number	Application	Image
3/16in x 3 7/16in (4.76mm x 87mm) HSS Parting Tool (Sever tool)	43-711-00 43-711-00P	Standard parting, most materials up to 1in (25.4mm) wall (low clearance)
3/16in x 5in (4.76mm x 127mm) HSS Parting Tool (Sever tool)	43-711-01 43-711-01P	Parting for most materials, up to 1in (25.4mm) wall
1/4in x 6in (6.35mm x 152mm) HSS Parting Tool (Sever tool)	60-711-00 60-711-00P	Heavy wall parting, most materials, up to 2in (50.8mm) wall
4.3in (110mm) Carbide Insert Holder for 3/16in (4.76mm) parting insert	60-716-00 SUPERSEDES 43-704-00	Standard parting, most materials up to 1 1/2in (38.1mm) wall
3/16in (4.76mm) Carbide Insert	60-717-00 SUPERSEDES 43-705-00	For use with 60-716-00 Insert Holder
4.3in (110mm) Carbide Insert Holder for 1/4in (6.35mm) parting insert	60-714-00 SUPERSEDES 47-701-00	Standard parting, most materials up to 1 1/2in (38.1mm) wall
1/4in (6.35mm) Carbide Insert(	60-715-00 SUPERSEDES 47-702-10	For use with 60-714-00 Insert Holder

Single Point Tooling
Description	Part Number	Application	Image
HSS Tool Bit for single point facing, beveling and flange facing. Standard 3/8in x 3/8in (9.53mm x 9.53mm) For use with LCSF Bridge Slide	52-701-01 52-701-01P	Single point beveling Most materials less than 32RC hardness
HSS Radius Tool Bit for J-prep	52-711-01	3/32in (2.38mm) radius
	52-711-02	1/8in (3.18mm) radius
	52-711-03	3/16in (4.76mm) radius
Tool Holder for HSS Tool Bit	60-707-00	Heavy wall pipe beveling, all materials